Rope displacement sensor signal output is divided into a digital signal output and analog output, digital output type can choose the amount of rotary encoder, absolute encoder output signal is a square wave ABZ signal or Gray code signal, the trip can be done 80 m, the linear precision of 0.01% and resolution depending on the configuration can be up to 0.001 mm / pulse. 
 The analog output type you can choose the precision potentiometers, Hall encoder, absolute encoder, the output signal of 4-20 mA, 0 -5 V 0 -10 volt, serial SSI and resistance signals, the maximum stroke up to 12,500 mm, maximum use of the environment can reach IP65 protection rating, -45 ℃ to +105 ℃ can be used in a wide temperature environment. 
 Rope displacement sensor, displacement sensor of Effective Stroke, (mm) measurement of travel (100mm to 1000mm) between the range any optional 
 Rope displacement sensors, displacement sensors Output Signal the Mode output signal mode of the Resistance (Potentiometer) 0-10V, 0-5V, 4-20mA 
 Rope displacement sensors, displacement sensors the Output wave output waveform Square Wave square wave 
 Rope displacement sensor, displacement sensor Accuracy accuracy of ± 0.05% FS, ± 1count 
 Rope displacement sensor and displacement sensor Resolution (mm / Pulse) parsing 1, 0.5, 0.2, 0.1, 0.04, 0.01 
 Rope displacement sensors, displacement sensors the Output phase output phase AB phase or ABZ in The phase 
 Rope displacement sensors, displacement sensors Electronics circuit characteristics of voltage type, Open Collector current-mode, the Push pull push-pull differential 
 Rope displacement sensor and displacement sensor Power supply operating voltage DC12-28V, DC5Vfixed 
 Rope displacement transducer, displacement transducer Current consumption Current consumption <= 30mA 
 Rope displacement sensors, displacement sensors the Output Capacity Output Capacity Sync. Current: 20mA, Residual